Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Azle, TX
Most gate calls we run in Azle involve access control problems on automatic driveway gates: a keypad that stopped talking to the board, a remote that works only from ten feet away, or a phone-entry system that quit after a storm. The housing stock here, acreage parcels with long caliche drives and pipe-framed farm gates, means the control hardware gets exposed to heat, dust, and lightning in ways a suburban cul-de-sac gate never does. If your gate opens only sometimes or the intercom crackles when you try to buzz someone in, call (940) 353-4158 and we’ll walk you through what we’re likely to find before we send a technician.
Why Azle Homes Are Different
Azle sits on shrink-swell clay. That single fact explains more gate repairs here than any brand of motor or hinge. The clay expands after North Texas thunderstorm seasons and contracts hard during summer drought, which heaves gate posts out of plumb and throws hinge alignment off by fractions of an inch that translate into a gate dragging on the latch side or an operator fighting the load every cycle. Homes built in the 1970s through 1990s on 1 to 10 acre parcels along FM 730 and the rural roads feeding Eagle Mountain Lake carry farm-style pipe gates and heavy automatic swing gates on caliche or gravel drives. When the base under a slide gate track shifts after rain, the track roller binds, and the motor burns itself out trying to move a gate that hasn’t moved easily in months. Azle’s gate work is more structural than in Keller or Saginaw because the ground itself moves.
Our Main Azle Services
Three services cover the majority of what Azle homeowners call us about: repair on existing gates, installation of new ones, and motor or opener work on automation that has stopped cooperating. Full details live on their own pages, each written specifically for Azle conditions.
Gate Repair in Azle
Repair here usually means hinge re-alignment after clay movement, welding a cracked pipe joint, or replacing wheels and rollers on slide gates. We quote a written price before any work starts, then document what we found and what we changed. Gate Repair in Azle
Gate Installation in Azle
New gates on acreage need posts set for the soil they’ll sit in, not just for the gate’s weight. We plan for clay movement from day one: deeper set posts, proper concrete, and hardware sized for a 14-foot pipe gate, not a backyard privacy panel. Gate Installation in Azle
Gate Motor & Opener in Azle
Swing and slide operators on Azle’s longer drives need their limit switches set exactly right, and the clay means they need re-setting more often than on slab drives. We service the motor already on your gate rather than steering you toward a replacement. Gate Motor & Opener in Azle
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Azle
Access control on an Azle gate means the keypad, remote receiver, phone entry box, or intercom that decides who gets in. On acreage properties with long drives and a gate set back from the road, these components sit exposed to heat, dust, and the electrical surges that roll through during thunderstorm season. Fixing them isn’t just swapping a keypad; it’s tracing the low-voltage wiring from the operator board out to the keypad and the exit loop, then matching the new component’s protocol to whatever board already runs the gate. Some Azle properties still run older FAAC or Linear boards, and a new keypad that doesn’t speak the right language is as useless as no keypad at all. Our work falls under what we call Gate Access Control, and we document every wire pull and setting change before we leave.
Keypad Entry
Signs you need it
The keypad lights up but won’t trigger the gate, or it works only when pressed hard, which usually means a corroded contact strip or water intrusion at the housing seam.
What it costs in Azle
Keypad replacement or repair in Azle typically runs $140 to $360, depending on whether we’re matching an existing protocol or running new low-voltage wire to the operator.
How we do it
We test voltage at the keypad first, check continuity on the wire run, confirm the board is receiving the trigger, and either rebuild the keypad internals or replace it with a unit that matches your operator’s brand and protocol.
Video Intercom
Signs you need it
The video feed is black, the audio buzzes, or the call button rings inside but the gate release button does nothing, which often points to a failed power supply or a shorted station wire.
What it costs in Azle
Most video intercom repairs in Azle fall between $290 and $720, depending on whether the monitor, the station, or the wiring between them is at fault.
How we do it
We isolate the fault by testing the station, the indoor monitor, and the wire run separately, then replace or re-terminate only what failed and photograph the repaired terminations before we button anything up.
What Gate Access Control Costs in Azle
| Item | Typical range in Azle |
|---|---|
| Keypad replacement | $140 - $360 |
| Video intercom repair | $290 - $720 |
| Phone-entry or card-reader board replacement | $200 - $500 |
Can you match a new keypad to an older gate board?
In most cases, yes. We stock or can order keypads and receivers compatible with the boards already common on Azle acreage gates, including older FAAC, Linear, and BFT panels. Call (940) 353-4158 with your board’s model number and we’ll confirm before scheduling.
Why does my gate intercom fail after storms?
Lightning-induced surges on the low-voltage line are the usual culprit in Azle, especially on long wire runs from the house to a gate near the road. We often add a surge suppressor at the operator and re-terminate corroded connections, then test the whole run.
Gate Parts & Welding in Azle
Parts and welding on an Azle gate usually means structural work: a hinge that tore loose from a post after clay movement, a crack in a pipe gate at a weld joint, or a slide-gate roller that wore flat on a gravel drive. The wet-dry cycles here make post re-setting and hinge re-alignment repeat business, and a weld repair on a farm-style gate is often the difference between replacing a $900 gate and keeping the one that’s already hung. This work falls under Gate Parts & Welding, and every repair gets a photo record before we leave.
Hinge Replacement
Signs you need it
The gate sags toward the latch and scrapes the ground, or the hinge pin has wallowed out the barrel, which usually means the post moved or the hinge was undersized for a heavy automatic gate.
What it costs in Azle
Hinge replacement on an Azle acreage gate typically runs $90 to $230 per hinge, including heavier hardware sized for the gate’s actual weight.
How we do it
We match the replacement hinge to the gate’s weight and post condition, weld or bolt it in as the original was, and set the gate back to level before testing the swing and latching.
Post Replacement
Signs you need it
The post leans visibly after storms or dry spells, or the gate binds because the hinge-side post has twisted enough to throw the gate out of plane.
What it costs in Azle
Post replacement in Azle generally falls between $280 and $650, depending on depth, concrete removal, and whether the operator arm needs to be re-set with the new post.
How we do it
We saw off and remove the old post, dig a deeper footing than the original, set the new post in concrete appropriate for the clay soil, and re-hang the gate to plumb and level before testing the full cycle.
What Gate Parts & Welding Costs in Azle
| Item | Typical range in Azle |
|---|---|
| Hinge replacement | $90 - $230 per hinge |
| Post replacement | $280 - $650 |
| Slide-gate roller or track repair | $150 - $400 |
Can you weld a crack without replacing the whole gate?
Usually, yes. We grind out the crack, weld it with proper penetration, and often add a gusset plate to keep the joint from re-cracking at the same spot. Call (940) 353-4158 and describe the gate; we’ll tell you what repair is realistic.
What does it cost to re-set a leaning gate post in Azle?
Post re-setting runs $280 to $650 depending on depth and concrete work, and we quote it in writing before touching the post. The price includes re-hanging the gate and testing the operator after the post is set.
Brands We Service in Azle
We work on most automation already installed across Azle, including FAAC, BFT, Linear, and Viking operators, plus the common residential boards on acreage gates. Common replacement parts for these systems are stocked on the truck. Turnaround on parts we don’t carry is usually one to three business days.
Pricing for Gate Repair in Azle, TX
| Service | Typical range in Azle |
|---|---|
| Keypad replacement | $140 - $360 |
| Video intercom repair | $290 - $720 |
| Phone-entry or card-reader board replacement | $200 - $500 |
| Hinge replacement | $90 - $230 per hinge |
| Post replacement or re-setting | $280 - $650 |
| Slide-gate roller or track repair | $150 - $400 |
What pushes a price up in Azle is almost always the soil: a post that has to be dug deep through clay and root mass, or a gate that needs to be re-hung after the ground shifted under the track. We hand you a written price before any tool comes off the truck, and it’s the price you pay unless you approve a change in writing.
Neighborhoods We Serve in Azle
We cover the full Azle area, from Eagle Mountain Lake shoreline properties to the rural roads running out FM 730 and FM 1886, and down into the acreage subdivisions on the Parker and Tarrant county sides.
- Eagle Mountain Lake shoreline
- FM 730 corridor
- FM 1886 corridor
- Ash Creek
- Briar-Reno
Technicians dispatched to Azle jobs typically arrive within a couple of hours for urgent failures, and a live person answers the phone 24/7 for scheduling.
Service Area - Cities Near Azle
We also serve the communities around Azle, including Weatherford, TX to the west, Haltom City, TX to the southeast, and Fort Worth, TX directly to the south. Homeowners in North Richland Hills, TX are covered as well. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office; crews serve Azle locally.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Azle
For a gate stuck shut or stuck open on an Azle property, we usually have a technician on site within a couple of hours during the day and still answer the phone for urgent calls at any hour. A live person schedules the call, not a voicemail queue. Call (940) 353-4158 and we’ll tell you when a truck can be at your gate.
Most repairs on existing gates don’t require a permit, since the gate and posts already stand. New gate installation on some Azle acreage parcels may trigger setback or easement requirements depending on the road frontage and HOA. We can tell you what typically applies on your street when we look at the job.
Yes, and that’s a common job in this area. Gravel and caliche drives make slide-gate track rollers wear faster and throw roller adjustments off after heavy rain, so we check the track base as part of any motor or roller repair. The written price covers whatever we find.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Azle Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.