Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pecan Acres
Gate installation in Pecan Acres, TX usually means a heavy ranch gate on a wide driveway, not a decorative suburban entry. Most properties out here sit on 1 to 5+ acres with long gravel drives designed for trailers, horses, and farm equipment. That changes what gets installed: larger operators, deeper post footings, and wiring that has to travel hundreds of feet from the house. We know the area because we work it every week. If you need a driveway gate, sliding gate, or swing gate built or replaced in Pecan Acres, call (940) 353-4158 and we’ll come out, measure the opening, and hand you a written price before anything gets ordered.
Why Vance Gate Repair Weatherford Is Pecan Acres’s Preferred Gate Installation Company
Vance Gate Repair has put in and repaired more than 22,000 gates since Adrian Vance started the company in 2014, working first on commercial access-control sites before moving into residential work. That background shows up in how we handle a Pecan Acres job. Every installation gets a written scope, a written price, and a photo record of what went in and how it was set. You get that file when we leave. No guessing later, no paying a second company to rediscover what the first one did. Our techs arrive background-checked and uniformed, with their name and photo sent to you before they pull up the drive.
Pecan Acres sits far enough from the metro core that response time matters. Our crews serve Pecan Acres locally, coordinated from the Dallas-Fort Worth office, so we’re not scheduling you three weeks out from a map pin we rarely visit. We see the same clay soil, the same unincorporated permitting situation, and the same wide gate openings every week. That local familiarity saves you time and money, because we already know what your installation is up against before we set the first post.
Our Gate Installation Services in Pecan Acres
Driveway Gate Installation
Driveway gates in Pecan Acres are the core of what we install. These are ranch-style entrances: 12, 14, 16, sometimes 20-foot openings built to clear a truck and trailer. The gate has to carry real weight, cycle thousands of times a year, and stay plumb in soil that moves. We size the post footings for Tarrant County clay, which means going deeper than a suburban installer would, and we set the operator for the actual gate weight and leaf span rather than whatever comes in the kit box.
Swing Gate Installation
Swing gates dominate the acreage lots along Peden Road and the surrounding horse properties. A double swing gate spanning 20 feet on a 5-acre parcel needs operators rated for that span and hinged so the weight doesn’t pull the post out of true. We install swing gates with the post embedment depth calculated for the shrink-swell zone here, then set the limit switches and safety edges so the gate stops cleanly instead of slamming the post or stalling in the middle of its arc.
Sliding Gate Installation
Sliding gates suit properties where the driveway slopes toward the road or where a swing gate would interfere with a fenced paddock line. In Pecan Acres, a 20-foot slide gate needs a track and roller system that can handle dust and gravel accumulation without jamming. We build the slide rail on a proper concrete base, set the catch post, and use operators sized for the gate weight, not the retail spec sheet. Solar is common here, especially on long drives where trenching grid power would mean cutting through pasture or mature pecans.
Pedestrian Gate Installation
Pedestrian gates out here usually pair with a larger driveway gate or act as a separate entry from the house to a barn or utility area. We install them as steel or tube-frame units hung on sleeves set in concrete, with the same attention to clay movement that the big gates get. A pedestrian gate that binds or drags is almost always a post that shifted, and we set ours to stay put through the wet-dry cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Pecan Acres
We install and service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Pecan Acres because many properties already have an opener on the post, and the right answer is often to reuse it rather than rip it out. We stock common parts for LiftMaster, FAAC, and Mighty Mule systems, which covers a large share of what’s already installed on acreage gates across northwest Tarrant County. When we install new, we recommend based on the gate weight, leaf span, and power source, not on whichever brand we happen to carry that month.
Common Gate Installation Problems We See in Pecan Acres Homes
- Heavy pipe-frame gates sag at the hinge post. The original footing was almost always poured for suburban soil, not the expansive black clay that runs through this part of Tarrant County. Within a few wet winters and dry summers, the post heaves out of plumb and the whole gate starts dragging.
- Solar openers undersized for wide ranch gates drain during cloudy winter weeks. A 20-foot slide gate needs a bigger panel and battery bank than the kit provides. We see dead batteries every January when the sky stays gray and the gate gets cycled twice a day for feed runs.
- Older installations wired without a loop detector fail to open for horse trailers backing up from the road. Without a vehicle loop in the gravel, the gate won’t trigger for a trailer that isn’t directly over the sensor pad, forcing drivers to stop and block the driveway while they wait.
- Non-code-compliant entrapment protection on gates older than ten years. Because Pecan Acres is unincorporated, gate work falls under Tarrant County rather than a municipal permitting office. A lot of older setups lack the UL 325 required photo-eyes and reverse edges, which is a safety problem we address on every installation we correct.
Pricing for Gate Installation in Pecan Acres, TX
A typical driveway gate installation in Pecan Acres runs $3,800 to $9,600 depending on gate width, material, and whether you need a single swing, double swing, or slide. A standard double swing gate spanning 16 to 20 feet in tubular steel usually lands between $4,200 and $7,800 including the operators. Adding a solar power system instead of trenching grid power adds roughly $800 to $1,600 depending on panel and battery size. Most swing-gate motor replacements in this area run $850 to $1,700 for the operator and labor, assuming the existing post is still sound. That’s the number most people call about, so I’ll say it plainly: if your hinge post has tilted, the repair is more than a motor swap. The price changes when we have to cut back the footing, reset the post, and re-hang the leaf. Every job is quoted in writing before any work starts, and that written price is the price. Call (940) 353-4158 for a free measure and written estimate on any gate installation in Pecan Acres.
We Also Serve Cities Near Pecan Acres
Our crews cover Pecan Acres and the surrounding northwest Tarrant County area, including Weatherford, Azle, White Settlement, and Benbrook. If you’re on the edge of Pecan Acres, call and we’ll confirm coverage. You can also see our full service area on our Gate Installation page.
Serving Pecan Acres, TX - Our Local Coverage Area
We’re based in the Pecan Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pecan Acres
Your hinge post is moving in the clay. Most ranch gates in this area were set on footings sized for stable soil, not the expansive black clay that runs under northwest Tarrant County. When summer drought cracks the ground and winter rain swells it, the post tilts a few degrees each year, and a 16-foot steel leaf becomes a long lever prying it further out. The fix is to reset the post deeper, below the shrink-swell zone, in a properly sized concrete footing. Then re-hang the leaf and verify the operator limits. Call (940) 353-4158 and we’ll come measure the deflection and give you a written repair price.
Yes, but it has to be sized correctly. A 20-foot slide or double swing gate on a long gravel drive in Pecan Acres needs a larger solar panel and a bigger battery bank than the retail kit provides. Undersized setups work in summer and die during cloudy winter weeks when the gate cycles twice a day for feed runs and trailer moves. We calculate the wattage against actual gate weight, opener draw, and winter sun angles for this latitude, then spec a panel and batteries that hold through a gray January. Call (940) 353-4158 for a written estimate on a solar gate opener sized for your gate.
No, a loop detector is not legally required by Tarrant County for a private residential gate on unincorporated property. But that’s a building-code answer, not a practical one. Without a vehicle loop or a free-exit sensor, a horse trailer backing up from the road won’t trigger the gate, and you’ll be stopping to block the gravel drive every time. We recommend some form of vehicle detection on any driveway gate wider than 12 feet, regardless of what code says. Call (940) 353-4158 and we’ll explain the options and quote it in writing.
For a 20-foot double swing on a 5-acre horse property in Pecan Acres, you need an operator rated for at least 600 pounds per leaf and a 16-foot maximum leaf span, which typically puts you in the commercial or heavy-duty residential class, something like a LiftMaster LA400 or larger depending on the gate’s actual weight. A 20-foot opening means each leaf spans about 10 feet, but if one leaf is wider than the other, the operator on the wider leaf has to work harder. A Mighty Mule or Ghost Controls kit will not hold up on that span. Call (940) 353-4158 and we’ll size it from the actual leaf weight, not the marketing spec.
Because the post shifted during a wet spell. North Texas’s clay swells several inches in wet winters and spring, which tilts the hinge post just enough to throw the operator out of alignment. The motor still runs, but the gate now binds against the post or drags on the ground, and the opener either stalls or trips its limit switch. We reset the post below the shrink-swell zone, re-hang the leaf, and reset the operator limits. Sometimes the operator survives; sometimes the misalignment has already burned out the motor. We’ll tell you which it is before you spend anything. Call (940) 353-4158 for an assessment.
What Makes Pecan Acres Gate Installation Different
In unincorporated Pecan Acres, gate installations fall under Tarrant County’s permitting regime rather than a municipal office. That has real consequences. Many older automated gate setups here were built without inspections, and a surprising number lack the UL 325 required entrapment protection: photo-eyes that stop the gate if something crosses the path, and reversing edges that prevent crushing. On nearly every service call for a gate older than ten years, our techs find the same pattern. So when we install a new gate in Pecan Acres, we correct that. The new gate gets the sensors, the reverse edges, and the safety features the original install skipped. We didn’t write the code, but we follow it, because a 16-foot steel gate that doesn’t stop is a hazard, not a convenience.
The soil here is your gate’s biggest enemy, full stop. Tarrant County sits on Vertisol, a black clay that swells several inches in wet winters and cracks open in summer drought. That cycle tilts gate posts, throws openers out of alignment, and stresses hinge welds on a near-annual basis. A gate installed without accounting for that movement will fail early and often. Our installations set post footings below the active shrink-swell zone, which means deeper concrete and more of it. It costs more than a shallow suburban footing, but it’s the difference between a gate that holds its line for a decade and one that’s dragging by the third spring. That’s the installation correction this area is built around.
We replaced a failing 16-foot tubular steel swing gate on a 4-acre horse property off Peden Road after the hinge post tilted in a summer drought, throwing the operator out of alignment. Our crew cut back the post footing, reset it in concrete with deeper embedment below the Vertisol shrink-swell zone, then remounted a LiftMaster LA400 operator with a new safety photocell pair and keypad entry. Now the gate cycles cleanly even as the clay contracts. That job is the pattern for what Pecan Acres installation work actually involves: wide steel, heavy posts, and soil that fights back.
Get a Written Price for Your Pecan Acres Gate Installation
If you’re planning a new gate on your Pecan Acres property, we’ll come out, measure the opening, check the soil at the post locations, and hand you a written price before any work starts. No surprises on the invoice. You’ll also get a documented photo record when we’re done: what was found, what was installed, and how it was set. Call (940) 353-4158 for a free estimate, or to have a technician walk your gate line and tell you what it needs.
Written by Adrian Vance, Owner at Vance Gate Repair Weatherford, serving Pecan Acres with documented gate installation and repair since 2014.