Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fort Worth
Gate repair in Fort Worth usually comes down to one of two things: a post that has moved, or a motor that has quit. That’s it. Most automatic and ornamental driveway gates fail because the Blackland clay under the post heaved it out of true, or because the operator’s limit switch or photo-eye is out of adjustment. A typical hinge and post repair in Fort Worth runs $180 to $420. A swing-gate motor replacement runs $650 to $1,400 depending on brand and whether the arm bracket and wiring are intact. Call us at (940) 353-4158 and we’ll have a technician look at it, with a written price in hand before any tool comes off the truck.
Why Vance Gate Repair Weatherford Is Fort Worth’s Preferred Gate Repair Company
We work in Fort Worth every week. Our techs know the older neighborhoods like Polytechnic and Riverside, where 1950s ornamental iron gates sit on shallow footings in expansive clay that has been heaving for six or seven decades. Those posts tilt, the gate drags, and the latch misses by inches. We reset the post, re-hang the gate, and photograph the new position before we leave. That documentation is part of The Haven Standard, Adrian Vance’s protocol for every job we run: a written price before work starts, a photo record of what we found and what we changed, and the 365-Day Done Right Promise. If the repair is not right within a year, we make it right at no charge.
Homeowners in Fort Worth consistently tell us the same thing: they want to see the number before they agree to the work. We hand over a flat written quote before anything begins. No ranges after the fact, no surprise invoice at the end. And we leave every customer with a documented record: part numbers, limit-switch readings, wiring adjustments, photos. That way no future technician has to guess, and you never pay twice to rediscover the same problem.
One more thing worth saying plainly: a live person answers our phone 24 hours a day, seven days a week. No automated attendant, no callback queue. If your gate fails at 11 p.m. in Fort Worth and you need to talk to someone, you’ll get a person.
Our Gate Repair Services in Fort Worth
Electric Gate Repair
Electric gate repair in Fort Worth covers everything from dead control boards and failed photo-eyes to limit switches set a few degrees too far past travel. We service the motor that is already on your property: LiftMaster, FAAC, BFT, and Mighty Mule included, among others. We carry common parts in our trucks for Fort Worth calls, so many electric gate repairs are done on the first visit. If the operator is frozen, burned out, or shorted from an ice storm, we diagnose it on site and give you a written price for the fix before ordering a single part.
Automatic Gate Repair
Automatic gate repair means the gate moves, but it moves wrong. It stops halfway. It reverses for no reason. It grinds or shudders. The photo-eye, the beam that stops the gate when something crosses the path, gets knocked out of alignment by wind, kids, or a badly tilted post. We re-align it, verify the UL 325 entrapment protection is functioning, and log the reading. A repair that leaves your gate working but unsafe is not a repair we will sign off on.
Hinge & Post Repair
This is the bread and butter of Fort Worth gate work. The city sits on the Fort Worth Prairie’s expansive Blackland clay, and that soil moves. Wet winters swell it. Drought summers shrink it. Gate posts set in 1950s and 1960s footings rotate out of true over time, and the hinge bearings take the load unevenly until the gate sags or misses the latch. We excavate, re-set the post with properly mixed concrete, re-hang the gate on corrected hinges, and document the before and after. If you’re in Riverside or Polytechnic with an original wrought iron gate that’s been dragging for years, this is the call to make.
Gate Realignment
Gate realignment is what happens when a gate is hung out of level but the posts themselves are still sound. We adjust the hinges, shim where needed, and reset the travel limits on the operator so the gate opens fully and closes flush without fighting the latch. Fort Worth summers push metal components out of alignment by thermal expansion alone. A gate that latched fine in February may miss by a quarter inch in August. That is a realignment call, and it is usually a quick fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Worth
We work on whatever motor is already bolted to your Fort Worth gate. LiftMaster, FAAC, BFT, Mighty Mule. Nine major automation brands in total, so we’re never going to tell you that your perfectly repairable FAAC needs to be replaced because we only carry one line. Our trucks are stocked with the common parts for the major brands, which means we’re not waiting on a ground shipment every time a control board fries. If you have the model number, our dispatcher can tell you on the phone whether we carry the part before we even arrive.
Common Gate Repair Problems We See in Fort Worth Homes
- Heaved hinge posts in Blackland clay. The Fort Worth Prairie’s expansive soil swells and shrinks with seasonal moisture. Older footings in Riverside and Polytechnic were poured shallow, and decades of heave cycles have tilted posts until gates drag or miss the latch by several inches.
- HOA compliance failures. In master-planned communities like Walsh Ranch, ornamental iron gates that are repaired with a mismatched finish or a different picket style fail architectural review. We coordinate with the management company, match the original hardware, and document that the repair matches the HOA’s standard.
- Ice storm operator failures. Winter Storm Uri showed what a hard freeze does to Fort Worth. Hydraulic fluid thickens, electric operators seize, and subsequent thaw cycles crack powder-coat. We replace the damaged components, not the whole gate.
- Photo-eye and safety edge faults. UL 325 requires entrapment protection on automatic gates, and in Fort Worth the big wind and shifting posts knock photo-eyes out of line constantly. A misaligned beam inside the community entrance gate is the fastest way for an entire shared access system to stop working.
Pricing for Gate Repair in Fort Worth, TX
Here are real numbers for the Fort Worth market. Hinge and post repair typically runs $180 to $420 depending on whether we are excavating and re-setting a footing or just re-hanging the gate on existing hardware. Gate realignment usually falls between $120 and $250. Electric gate repair, including a new photo-eye or limit-switch adjustment, typically runs $95 to $380 depending on the part. A full swing-gate motor replacement on an older residential gate runs $650 to $1,400 when we install the operator, run the low-voltage wiring, and set the travel limits. A heavy pipe-and-tube ranch gate on equestrian acreage in far west or southwest Fort Worth runs higher because the posts are deeper, the gates weigh more, and we often bring the welder. Every job gets a written flat price before work begins, and a documented photo record when we leave. Call (940) 353-4158 for an exact quote, no obligation, no cost.
We Also Serve Cities Near Fort Worth
If you’re in Haltom City, North Richland Hills, Crowley, or Burleson, we send the same Fort Worth crew to you. The soil is different in some of those places, and the gate issues shift accordingly. For a deeper look at how we work across the region, see our Gate Repair team’s full service breakdown, or for more on local neighborhoods and conditions, see Gate Repair in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fort Worth
In most HOA-governed communities, yes, and you should confirm the process before any work begins. In master-planned communities like Walsh Ranch, ornamental iron gates fall under architectural review, and the board typically cares about finish, height, picket style, and overall appearance matching the original. We work directly with management companies and can provide spec sheets, paint codes, and before-and-after photos for the approval packet. Call (940) 353-4158 if you’re not sure what your HOA needs; we can usually tell you what to request.
The short answer is Fairmount sits on Fort Worth Prairie Blackland clay, and that soil expands and contracts far more than the sandier ground you find in neighboring cities. If a post was re-set without addressing the soil or without a deep enough footing, it will tilt again within a few years. We excavate past the active soil zone, pour a footing sized for the clay conditions, and set the post with proper drainage so water is not pooling against the base. Then we photograph the whole thing, so you have a record of what was done.
The fix is not specific to Fort Worth, but the frequency of the problem is. Uri-style freezes hit a lot of automatic gates here, and the hard part is that thaw cycles crack components that still look fine visually. We test the operator under load, check the hydraulic fluid or gearbox for water intrusion, and replace seals or boards rather than patching around a problem that will return at the next freeze. If your gate is still sluggish or noisy since the last ice event, call us and we’ll diagnose it; you’ll get a written price before we touch it.
Usually, yes. Most ranch gates in far west and southwest Fort Worth are built from steel heavy enough that the gate itself is fine when it fails. The post or the hinge weld is what goes. We weld cracked hinges in place, re-set the post if the clay has heaved it, and re-hang the gate with proper alignment. We can also install or repair a predator-style opener like a Mighty Mule or FAAC unit. The written price includes everything: labor, welding, parts, and the photo record. Call (940) 353-4158 and describe the gate; we’ll give you a number.
UL 325 is the safety standard that says your automatic gate must have entrapment protection: typically a photo-eye beam and a reversing mechanism that prevents the gate from crushing or pinning a person or vehicle. If your gate is reversing too hard, too often, or not at all when something crosses its path, the entrapment protection is not working and the gate is unsafe. We test the photo-eye alignment, verify the force settings on the operator, and leave you with a reading, not just a “looks fine.” It is the most important part of any automatic gate repair, and it is the first thing we check.
If your Fort Worth gate is dragging, dead, or frozen, call us at (940) 353-4158. We’ll send a background-checked, uniformed technician with a name and photo before arrival, and a written price before work starts. Free estimates, honest ranges, and a documented record when we leave.
Written by Adrian Vance, Owner at Vance Gate Repair Weatherford, serving Fort Worth since 2014 and running every job under The Haven Standard.