Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Weatherford
Most gate repair calls in Weatherford start with a post that moved. The clay under Parker County heaves after wet winters and shrinks in summer, so a gate that closed fine in October binds at the latch by March. We dispatch technicians to Weatherford daily from our DFW coordination office, and we come prepared for swing gates on 2 to 10 acre horse properties, heavy pipe ranch gates off the FM roads, and automatic openers - including your Weatherford Gate Motor & Opener - that took a beating during the last ice storm. If your gate won’t open, won’t close, or groans every time it moves, call (940) 353-4158 and we’ll get someone out to look at it.
Why Vance Gate Repair Is Weatherford’s Preferred Gate Repair Company
We work on the gates Weatherford actually has. That means pipe-and-panel ranch gates with cattle guards, ornamental iron driveway gates on acreage lots, and automatic slide gates on long entrances off US-180 and US-281. Our technicians check post plumb before touching the opener or hinges, because in this soil the post is usually the problem. Adrian Vance founded this company in 2014 doing commercial access control, and that habit carried over: on every job we leave a written price before tools come out, and a photo log of what was found, what was adjusted, and what was installed when we’re done. You get the record, not just the repair.
Weatherford homeowners who’ve used us tend to mention two things: the written estimate and the documentation. Under The Haven Standard, you get a flat price in writing before any work starts, and a documented photo record on every visit at no additional charge. If the repair isn’t right, our 365-Day Done Right Promise means we make it right within the year, no argument and no extra fee. That’s how we’ve handled more than 22,000 gate repairs and installations across North Texas since 2014.
Our Gate Repair Services in Weatherford
Electric Gate Repair
Electric gate operators on Weatherford acreage properties fail in predictable ways. Ice storms damage low-voltage wiring, circuit boards, and battery backups. Clay soil movement misaligns photo-eyes and limit switches. We service nine automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair the motor you already have rather than steering you toward a replacement. A typical electric gate diagnostic call in Weatherford runs $85 to $185, and the repair itself depends on what we find, not on what we’d rather sell you.
Automatic Gate Repair
Automatic gates on rural Weatherford entrances have a different workload than subdivision gates in Fort Worth. Longer, heavier gates stress the operator, and solar power is common where running grid power to the entrance isn’t practical. When a slide gate stops halfway or reverses after a rain, it’s usually the clay shifting the track, or water getting into the junction box. We check the operator, the rack, the photo-eye alignment, and the battery condition. Most automatic gate repairs in Weatherford are completed the same day, and you’ll know the price before we begin.
Hinge & Post Repair
Post heave is the root cause behind most sagging gates in Parker County. The expansive shrink-swell clay under your gate posts expands after wet winters and contracts hard in summer drought, and over time the post shifts out of plumb. That makes the gate bind at the latch, drop at the free end, or strain the opener. We reset posts, weld new hinge brackets, and brace the footing so the repair lasts through more than one season. On a ranch off Tin Top Road, we arrived to a 16-foot pipe swing gate that had dropped three inches at the latch. The hinge post had heaved out of plumb after a wet winter. We reset the post footing, welded a new hinge post bracket, adjusted the rack and pinion on the operator, and realigned the safety photocells so the gate closed without reversing.
Gate Realignment
Realignment is the most under-booked gate repair in Weatherford, and it’s usually the one that fixes the problem. A gate that scrapes the ground, won’t latch, or trips the auto-reverse is often just out of square because the posts moved. We bring the gate back to plumb, set the hinges, adjust the limit switches, and document the before-and-after positions. Along the FM roads radiating out from Weatherford, experienced local technicians check plumb first because the post has almost always moved first. A realignment call typically runs $150 to $300 depending on gate width and how far the post has shifted.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Weatherford
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule automation. No brand steering. We stock common parts in our DFW parts room and carry the rest on the truck, so Weatherford calls don’t wait on shipping. If you already have a quote from another company to replace a motor, we’ll give you a Gate Repair second opinion on that written estimate at no cost.
Common Gate Repair Problems We See in Weatherford Homes
- Clay soil heave shifting gate posts out of plumb. Swing gates bind at the latch, slide gates jump the rack, and the operator strains until something fails. We check post plumb on every call, because in Weatherford the post moves before the motor does.
- Heavy pipe ranch gates sagging at the hinge post. A 14 or 16 foot pipe gate on a working ranch entrance is a lot of weight on two hinge points. Sag makes the opener work harder and causes the loop detector to miss vehicles. We reset the post, weld the bracket, and set the operator limits to the gate’s actual travel.
- Ice storm damage to low-voltage wiring and circuit boards. February 2021 showed what North Texas ice does to exposed acreage entrances. Battery backups die, control boards short, and wiring corrodes. We replace what’s damaged and photo-document the new setup.
- Automatic slide gates reversing or stopping halfway after rain. Water intrusion in the junction box or a track that shifted with the clay are the usual culprits. We dry out the box, seal the connections, and realign the track so the gate doesn’t fault.
Pricing for Gate Repair in Weatherford, TX
Gate repair pricing in Weatherford is honest and upfront. A diagnostic call runs $85 to $185. Gate realignment typically costs $150 to $300. Hinge and post repair on a sagging gate runs $200 to $450 depending on the post condition and whether welding is needed. Automatic opener repairs range from $175 for a photo-eye replacement to $600 to $1,400 for a full operator replacement on a heavy-duty slide gate. Every job gets a written price before any work starts, and that price is what you pay. No surprise invoices. Call (940) 353-4158 for a free estimate on your specific gate.
We Also Serve Cities Near Weatherford
Our technicians cover Gate Repair in Weatherford and the surrounding Parker and Tarrant County areas, including Azle, Crowley, Fort Worth, and Haltom City. If your property sits between Weatherford and any of these towns, we’re already routing trucks through your area most days.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Weatherford
The gate itself isn’t sagging. The post is moving. Weatherford’s expansive clay soil heaves after rain and contracts in drought, and that movement slowly works the hinge post out of plumb. Tightening the hinge bolts doesn’t fix a post that’s leaning a few degrees. We reset the post footing and weld a new hinge bracket so the gate stays where you put it. Call (940) 353-4158 and we’ll check the post before anything else.
Solar is the standard answer for Weatherford acreage entrances where running conduit to the gate would cost thousands. We size the panel and battery to your gate’s daily cycles and the operator’s draw, then wire it so the battery stays healthy through our cloudy North Texas winters. A solar conversion or new solar install typically runs $800 to $2,200 depending on the operator and panel size, and we’ll hand you the written price before work starts.
Yes. We cut out the rusted section, weld in new pipe or tubing to match, and repaint the repair so it doesn’t stand out. This is everyday work for us on ranch entrances around Weatherford, not a specialty call. Rust repair on a bottom rail typically runs $150 to $400 depending on how much rail needs replacing, and we’ll quote it in writing before we weld.
Two likely causes: water got into the junction box or photoelectric sensor housing, or the track shifted with the clay. We open the box, dry out the connections, reseal them, and check the track alignment with the gate in motion. If the track moved, we reset it and verify the operator limits. Fixing this usually runs $175 to $350. Call (940) 353-4158 and we’ll diagnose it on site.
Annually is the honest answer, and twice a year if the gate is on a working ranch entrance with daily cattle or horse traffic. Weatherford’s clay soil and ice storms put extra stress on posts, operators, and wiring, and a yearly visit catches a shifting post before it kills the operator. We’ll service the opener, check post plumb, test the safety edges and photo-eyes, and leave you a photo log of everything we checked. That’s the Weatherford maintenance schedule we recommend, and we book it in writing.
Contact Vance Gate Repair in Weatherford
If your gate is sagging, binding, or refusing to open, call (940) 353-4158. A live person answers 24 hours a day, seven days a week, no voicemail loop. We’ll schedule a technician for your Weatherford property, hand you a written price before any work starts, and leave you a documented photo record when the job is done. That’s the Haven Standard, and it applies to every gate we touch.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Weatherford and Parker County since 2014.