Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
Gate installation in Fort Worth runs $2,800 to $11,500 for most residential work, with driveway gates in Walsh Ranch or Alliance Corridor typically landing between $4,200 and $8,900 depending on size, material, and whether automation is included. Same-week scheduling is available for most installations, and every job gets a written price before any concrete is poured or post hole dug. The one condition that defines gate work here more than any other is the Blackland clay under the topsoil, and we’ll tell you up front what that means for your posts, your operator, and your long-term maintenance. Call (940) 353-4158 and we’ll put the full scope in writing before you commit to anything.
Why Vance Gate Repair Weatherford Is Fort Worth’s Preferred Gate Installation Company
Adrian Vance started this company in 2014 doing commercial access-control work, where every install required a documented record: wiring diagrams, limit-switch readings, photo logs. That habit carried over into residential gates, and it’s why Fort Worth homeowners get something most gate companies never provide: a written scope, a written price, and photographic evidence of every adjustment before the technician leaves your driveway.
Our Fort Worth customers tend to come to us after reading the three-star reviews on other gate companies. They want to see the price on paper, not hear a vague verbal estimate. We hand you the flat number before any work starts, under Haven Standard Clause 1, and we don’t deviate from it unless you ask us to add something mid-job, which we’d quote and confirm first. Reviews from Fort Worth homeowners consistently mention the documentation they received, the named technician who arrived on time, and the fact that the final invoice matched the written quote to the dollar.
Our dispatch coordinates Fort Worth jobs from the Dallas-Fort Worth metro office, so a live person answers at (940) 353-4158 around the clock, and the crews that serve Fort Worth know the west-side clay, the east-side shallow footings, and the north-side HOA requirements. You’re not getting a random subcontractor with a pickup and a post-hole digger. You’re getting a background-checked technician in uniform, with their name and photo sent to you before they arrive.
Our Gate Installation Services in Fort Worth
Driveway Gate Installation
Driveway gates in Fort Worth are not one product. On the west and southwest sides, you have ranch and equestrian properties in the Aledo corridor and beyond 820 where the gate is a pipe-and-tube-steel working gate, wide enough for a truck with a trailer, set in moving clay. On the north side, from Alliance to Walsh Ranch, you have HOA-governed ornamental iron driveway gates where the association dictates height, finish, and even the operator brand. We install both, and we size the automation to the actual gate weight, not the builder’s assumption. A double ornamental iron gate in Walsh Ranch that weighs 900 pounds does not get the same operator as a 300-pound single swing gate in Fairmount.
Pedestrian Gate Installation
Pedestrian gates tend to get ignored until they don’t latch. In older Fort Worth neighborhoods like Fairmount or the Near Southside, Craftsman-era ironwork is beautiful and often worth saving, but the posts were set in shallow footings decades ago and have rotated in the clay. We install new pedestrian gates with posts sunk below the active clay line, and we can match the existing architectural style so the new gate doesn’t look like a catalog afterthought next to a 1920s brick bungalow.
Sliding Gate Installation
Sliding gates carry a specific failure risk in Fort Worth that other Texas cities on sandier soils almost never see: the rail. When Blackland clay heaves between a wet winter and a dry summer, the rail bed shifts, the wheel loads change, and the gate starts to bind on the track. We set the rail base below the clay line and compact the pad in lifts, because a slide gate on moving ground is a maintenance contract you never wanted. On residential lots where the driveway slopes, we’ll tell you honestly whether a slide gate is the right call or whether a swing gate makes more sense for your grade.
Swing Gate Installation
Swing gates are the most common gate type in Fort Worth, from double driveway gates in North Richland Hills border neighborhoods to single ornamental gates in Crowley. The hinge post is everything. If the post is not set on piers that reach below the expansive clay, the gate will drag within two seasons. We pour piers with rebar cages, minimum 42 inches deep on clay lots, and we photograph the hole, the rebar, and the concrete before the post goes in. That photo goes in your job record, and a copy goes to you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Worth
We install and service LiftMaster, DoorKing, and Elite operators among the nine major automation brands we work with across the metro. What that means for a Fort Worth homeowner is that we don’t steer you toward replacing a perfectly good operator just because it’s not the brand we sell most. If your builder installed a LiftMaster LA400 on your new construction gate and it’s undersized for the gate’s weight, we’ll show you the duty-cycle math and give you options. If the operator is fine and the post is the problem, we’ll tell you that instead and charge you for a post reset, not a new motor. We stock common parts locally for these brands, which keeps turnaround short when you call from anywhere in Fort Worth.
Common Gate Installation Problems We See in Fort Worth Homes
- Blackland clay heaving posts out of alignment. New construction on the west side, from Walsh Ranch toward the Tarrant-Parker line, sits on some of the most expansive clay in the metro. Shallow footings let hinge posts rotate, which drags swing gates and shifts slide rails out of level within the first two seasons. We sink posts below the active clay line, minimum 42 inches, with rebar cages to resist the heave cycle.
- Builder-grade operators sized for a flat lot and a light gate. LiftMaster LA400 and Ghost Controls operators are common on new construction, but they’re often undersized for double ornamental iron gates with HOAs requiring heavy steel construction. Fort Worth summers over 100°F amplify the problem by expanding metal and warping frames, putting more load on an already maxed-out operator.
- Missing conduit and power runs. A lot of Fort Worth homebuilders never ran conduit to the gate location during construction, even in newer developments where automation was obviously coming. Homeowners end up with surface wiring stapled along the fence or a solar operator that dies every winter. We can trench and run proper power, and we’ll put the conduit in the ground before the gate goes up so the finish looks intentional, not retrofitted.
- Older east-side and south-side gates with rotten post bases. In Polytechnic, Riverside, and parts of southeast Fort Worth, gates set in the 1950s and 60s were often placed in shallow concrete pads over clay. Decades of heave cycles have tilted the posts so far that gates miss the latch by inches. The gate itself may be fine; the foundation under it is not. We reset posts in deep piers and rehang the original gate when it’s salvageable, which saves Fort Worth homeowners the cost of an entire new gate assembly.
Pricing for Gate Installation in Fort Worth, TX
Here are actual numbers for the Fort Worth market, not vague ranges pulled from a national guide. A basic single swing driveway gate in powder-coated steel, installed with a LiftMaster operator and hardwired power, typically runs $3,800 to $6,200. A double ornamental iron driveway gate with automation, like what you’d see in Walsh Ranch or along the Alliance Corridor, runs $6,500 to $11,500 depending on size, finish, and operator duty cycle. Pedestrian gates, post and gate included, run $900 to $2,400 for most residential installs. Slide gates add $1,500 to $3,500 over a comparable swing gate because of the rail system and foundation work. If your gate needs a post reset before installation can proceed, that’s typically $600 to $1,800 per post depending on depth, access, and whether we’re digging in clay or hitting caliche. The price is written before any work starts, and it doesn’t change unless you add scope. Call (940) 353-4158 for an exact quote on your gate, and we’ll bring the written estimate to the site visit.
We Also Serve Cities Near Fort Worth
Our crews cover the full metro ring around Fort Worth, including Haltom City, North Richland Hills, Crowley, and Burleson. If you’re in one of these cities and need a gate installed or an existing gate repaired, you get the same written pricing, the same photo documentation, and the same 365-Day Done Right Promise. Our full Gate Installation services are described in detail on our main service page, and you can learn more about Gate Installation in Fort Worth right here.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Worth
Your builder’s contractor set the hinge posts in shallow footings over Blackland clay, and the clay has heaved enough to rotate the posts within the first two seasons. This is the most common installation failure we see in Walsh Ranch and across the far west side of Fort Worth. The fix is not an operator adjustment; it’s cutting out the old footings, pouring piers that extend below the active clay line (42 inches minimum, with rebar cages), and resetting the posts. We’ve done this exact repair on a double swing gate in Walsh Ranch where the original LiftMaster LA400 operator was fighting the misalignment until we replaced the foundation entirely. Call (940) 353-4158 and we’ll come assess whether your posts are shifting.
Yes, and the gate’s survivability depends on two things: the current condition of your hinge posts and whether there’s a power source within reach. Fairmount homes are mostly 1920s-1940s construction, and the original gate posts were often set shallow in clay that’s had a century to move. We assess the posts first. If they’re solid, we can add a LiftMaster, Elite, or DoorKing operator sized to your gate’s actual weight, run power properly, and install safety photocells and, where appropriate, a loop detector. If the posts are compromised, we reset them before putting any automation on the gate. The operator won’t fix old footings; it’ll wear itself out trying. Call (940) 353-4158 for a site visit and a written quote.
For most single-family driveways in Fort Worth, a remote control and properly installed safety photocells are sufficient, and we don’t push loop detectors on homeowners who won’t benefit from them. Loop detectors become worthwhile on properties where multiple vehicles come and go frequently, where the driveway doubles as a shared access, or where a vehicle sits close to the gate and trips the safety photocells repeatedly. The cost difference is real: a loop detector adds roughly $400 to $900 to the install, including the saw cut and loop wire. We’ll tell you honestly if your property doesn’t need one. Call (940) 353-4158 and we’ll walk you through what your specific driveway requires.
Yes, it’s a known pattern in Fort Worth. Solar gate operators rely on steady sunlight, and North Texas winters deliver too many overcast days, too-short sun windows, and the occasional ice event like Winter Storm Uri in 2021 that freezes batteries and kills charge capacity. If your gate is on the north side of the house or shaded by mature trees, the solar panel may never get enough direct sun to keep the battery topped off. The long-term fix is running hardwired power to the gate, which we can trench and install properly. Call (940) 353-4158 and we’ll assess whether your solar setup just needs bigger panels or whether hardwiring is the right call for your lot.
Neither. The operator is doing its job, and the gate is likely structurally fine. The problem is the hinge post, which has rotated in the Blackland clay and is now carrying the gate out of plane. Adjusting the operator to compensate will mask the symptom while the post keeps moving, and eventually the operator fails from fighting the misalignment. The correct repair is a post reset: dig below the active clay line, pour a deep pier with rebar, set the post true, and rehang the gate. We do this regularly across Fort Worth, especially on older east-side properties where the original footings were shallow and undersized. Call (940) 353-4158 and we’ll photograph the current condition, show you exactly what’s wrong, and write the repair scope on paper before work begins.
Get a Written Quote for Your Fort Worth Gate Installation
Vance Gate Repair Weatherford gives Fort Worth homeowners something most gate companies won’t: a written price before any work starts, a documented record of everything we find and every adjustment we make, and a full year under the 365-Day Done Right Promise for any repair that isn’t right. No verbal estimates, no surprise invoices, no subcontracted work. A live person answers (940) 353-4158 any time, day or night. Call now and we’ll schedule a free site assessment with a written quote in hand before you sign anything.
Written by Adrian Vance, Owner at Vance Gate Repair Weatherford, serving Fort Worth since 2014.
Gate Installation in Nearby Areas
