Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook runs $1,800 to $7,500 for most residential projects, depending on gate weight, operator type, and whether existing posts can be reused. We dispatch crews to Benbrook from our Dallas-Fort Worth office, and you’ll get a written price before any work starts. Our Gate Installation team handles everything from lightweight pedestrian gates to 500 lb pipe-steel equestrian swing gates west of Winscott Road. Call (940) 353-4158 and a live person answers, day or night.
Why Vance Gate Repair Weatherford Is Benbrook’s Preferred Gate Installation Company
We’ve hung gates on Benbrook properties where the clay soil has pushed a post 4 inches off plumb in one wet-dry cycle. That’s not a sales line; it’s a photograph in the job file. Adrian Vance started this company in 2014 doing commercial access-control work, and that habit of documenting what we found, what we changed, and what we installed carried over into every residential gate we touch since. Benbrook homeowners get the same record: photos, wiring notes, limit-switch readings, and the part numbers for anything we installed. Under Clause 4 of the Haven Standard, that photo log is part of every job at no additional charge.
We’re not the cheapest gate company in Tarrant County, and we don’t aim to be. We price flat and in writing before anyone picks up a tool. That means the invoice you sign is the price you pay, not a starting point. Benbrook customers who’ve called us after another company gave a verbal estimate and then added labor charges at the end tend to appreciate that difference. The 365-Day Done Right Promise covers every installation: if something isn’t right within a full year, we make it right. No argument, no fee.
Being local to Benbrook matters because the gate problems here aren’t the same as they are in Westover Hills or River Oaks. Equestrian zoning west of Winscott Road produces heavy pipe-steel gates on acreage. The 1970s and 1980s ranch homes south of I-20 have slide gates with worn rollers and obsolete operators. We know which problems show up where, and we stock the parts to fix them faster.
Our Gate Installation Services in Benbrook
Driveway Gate Installation
Most Benbrook driveway gates on the city’s east side are ornamental aluminum or steel on 4 to 6 inch posts, and the install is straightforward: set posts, hang panels, mount the operator, wire the safety edges and photocells. The west side of Benbrook is different. Acreage lots off Winscott Road, Williams Road, and along the southern edges near Benbrook Lake often have driveway gates weighing 300 lbs or more, built from pipe steel and built to keep horses in. Those installations demand 18-inch bell-bottom concrete footings and posts sized for the load, not for the catalog photo. A 400 lb gate on a thin-walled post is a failure waiting for the next wet spring. We size the post, the hinge, and the operator for the actual gate weight, and we photograph the footing before we backfill.
Pedestrian Gate Installation
Pedestrian gates in Benbrook usually serve pool enclosures, side yards, or the walk-through beside a larger driveway gate. The install itself is smaller, but the code and safety requirements aren’t. UL 325 entrapment standards apply to any automated pedestrian gate, and many older Benbrook homes have gates that predate those rules. When we install or upgrade a pedestrian gate, we bring the safety photocells and force settings to current code, not to what was acceptable in 1992. Typical pedestrian gate installation in Benbrook runs $900 to $2,200 including the operator.
Sliding Gate Installation
Benbrook’s ranch-era housing stock produced a lot of slide gates, especially on properties with long driveway approaches where a swing gate would block the drive. Slide gates from the 1970s through the 1990s are still common here, and many of them are tired: rollers worn flat, tracks bent from decades of clay movement, motors that predate modern safety requirements. When the track is straight and the concrete pad is sound, we can hang a new slide gate panel and operator in a day. When the pad has shifted with the clay, we cut and re-pour the track bed first. Replacement slide gate installations in Benbrook run $3,200 to $6,800 depending on gate length, track condition, and operator brand.
Swing Gate Installation
This is the service Benbrook calls about most, and the equestrian zones west of Winscott Road drive a lot of it. A 400 lb pipe-steel swing gate on acreage is a different installation than a 120 lb aluminum residential gate on Mary’s Creek Drive. The wind load alone on a solid steel panel is substantial, and the hinges have to be rated for it. We see hinge welds on heavy equestrian gates that were never sized for the gate, just burned in and painted over. When we install a swing gate on a Benbrook acreage property, we use double-shear hinges, posts set deep enough to resist Tarrant County’s clay heave, and operators matched to the actual gate weight. That’s why we ask for the gate’s dimensions and approximate weight before we quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Benbrook
We install and service nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Benbrook because homeowners inherit whatever operator the previous owner bought. If your acreage gate has a Viking swing-arm operator that’s been on the post since 2009, we can work with it, repair it, or replace it with a current model rather than telling you the whole gate has to go. We stock common parts for DoorKing, Elite, and LiftMaster systems locally and can have less common FAAC or BFT parts in hand quickly. Say what’s on the gate now and we’ll tell you honestly whether it’s worth saving.
Common Gate Installation Problems We See in Benbrook Homes
- Clay heave pushing heavy gate posts off plumb. Tarrant County’s Vertisol clay swells in wet winters and shrinks in 100°F summers, and a 400 lb equestrian gate compounds the problem. When the post moves, hinge welds shear and the operator’s gear track strips. We fix this by cutting out the old footing, re-pouring with an 18-inch bell-bottom, and documenting the new post position on camera.
- Rack-and-pinion stripping on heavy swing gates. A gate that weighs 350 to 500 lbs puts enormous force on the operator’s drive gear when the post has shifted even an inch. We see stripped gear tracks on Benbrook acreage gates regularly, and the fix usually requires post correction plus a new operator, not just one or the other.
- Worn rollers and tracks on 1970s-1990s slide gates. The ranch homes and acreage parcels in Benbrook have a lot of older slide gates. Rollers that haven’t been replaced in two decades wear flat, and the gate drags and strains the motor until the control board burns out. We replace the roller trucks, align the track, and check the motor’s current draw before calling it done.
- Obsolete operators lacking modern safety photocells. Many gates in Benbrook were automated before UL 325 entrapment standards became mandatory. We routinely find old swing gates with no photocells and no force-limiting adjustments. On any retrofit, we install current safety photocells and edge sensors. A gate that can crush a child or a horse is not a finished job.
Pricing for Gate Installation in Benbrook, TX
Here are honest numbers for the Benbrook market, with the flat price written before work begins. A standard single swing gate on existing posts runs $1,800 to $3,400. A heavier pipe-steel equestrian swing gate with new post footings runs $4,500 to $7,500. A sliding gate replacement on a good concrete pad starts around $3,200 and climbs with gate length and operator type. Pedestrian gates with automation run $900 to $2,200. What moves the price in Benbrook specifically is post condition. If the clay has shifted your posts, we either reset or re-pour them, and that’s concrete, labor, and time. We’ll tell you what we found before we quote it. Call (940) 353-4158 and we’ll walk the property, name the price, and hand it to you in writing.
We Also Serve Cities Near Benbrook
Our crews serve Gate Installation in Benbrook plus the surrounding area. That includes Weatherford, Azle, White Settlement, and Briar. If you’re on the Benbrook side of the county line, you’ll get the same written-price policy and the same documented photo record.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
Yes, in most cases a 1980s-era ranch gate can be retrofitted with a modern LiftMaster operator, provided the gate itself is still structurally sound and the hinges aren’t worn past repair. The real question is the post. If the post has shifted more than an inch or two from Tarrant County clay heave, the operator will bind and strip its gears no matter how new it is. We check the post with a level before we quote the operator, because putting a $900 motor on a tilted post is just financing a future failure. If the gate is sound and the post can be corrected, a retrofit runs $1,200 to $2,800 installed. Call (940) 353-4158 and we’ll tell you what you have before we sell you anything.
Because the ground under your hinge posts is moving. Properties near Benbrook Lake sit on particularly reactive Vertisol clay, and a wet spring swells the soil enough to push a heavy gate post out of plumb. Once the post is off by even an inch, the gate’s arc changes slightly, and the operator’s rack-and-pinion track starts taking load it wasn’t designed for. The fix is not another track. It’s cutting out and re-pouring the post footing in a bell-bottom configuration deep enough to resist the next swell cycle, then realigning the hinges and reinstalling the track. We do this work on Benbrook acreage regularly and photograph the footing before we backfill. Call (940) 353-4158 for a written quote.
You use a surface-mount pedestal or a welded mounting tab, not a drill-through. Pipe steel on equestrian gates is structural, and drilling holes through it for a keypad weakens the frame and invites rust inside the tube. We weld a small mounting plate to the gate frame, powder-coat or rust-treat the weld, and mount the keypad to the plate with sealed fasteners. The wiring runs through a grommeted chase welded to the frame, not loose through the pipes. A wired or wireless keypad for a Benbrook acreage gate runs $400 to $900 installed, depending on the access controller and whether we’re adding it during gate installation or retrofitting an existing gate. Call (940) 353-4158 for an exact number.
Solar can work on a Benbrook acreage gate if the gate is used moderately and the panel has a clear southern exposure, but it’s not right for every property. The problem on equestrian gates is weight. A 400 lb pipe-steel gate needs a bigger motor, and bigger motors draw more current, which drains a solar battery faster than a small panel can recharge it, especially during North Texas’s cloudy winter weeks. For a heavy gate with daily cycles, we usually recommend trenching a power run or pairing solar with a larger battery bank and a panel sized for the actual load. We’ll calculate the duty cycle and tell you honestly whether solar holds up or becomes a maintenance bill. Estimates are free; call (940) 353-4158.
Usually both, and the determinant is the track and rollers, not the panel. A slide gate that drags is almost always riding on flattened rollers or a track bed that the clay has tilted. If the rollers are worn but the concrete pad is sound, we can replace the roller trucks and re-level the gate in a few hours. If the concrete has shifted with the soil, resetting the track bed is required before the gate will ever roll cleanly, and that’s a concrete job. On Benbrook’s older slide gates, we also check the operator’s current draw, because a gate that’s been dragging for months has been overworking the motor. The fix depending on pad condition runs $500 to $2,500. Call (940) 353-4158 for a written price.
Get a Written Price for Your Benbrook Gate Installation
If you’re in Benbrook and need a gate installed, retrofitted, or repaired, call (940) 353-4158. A live person answers 24 hours a day. We’ll schedule a site visit, measure the gate, check the posts with a level, name the price in writing, and hand it to you before any work starts. That’s Clause 1 of the Haven Standard, and it’s not negotiable. Whether you’re off Winscott Road with a 500 lb equestrian swing gate or on the east side with a 1970s slide gate, you’ll get the same thing: a flat price, a documented job record, and a full year of coverage under the 365-Day Done Right Promise. Call today and speak with someone who knows Benbrook gates.
Written by Adrian Vance, Owner at Vance Gate Repair Weatherford, serving Benbrook since 2014.
Gate Installation in Nearby Areas
