Gate Repair in Richland Hills - Fixed Today, No Surprise Invoice

Gate Repair in Richland Hills, TX

Gate access control in Richland Hills means working on hardware that’s been standing since the Eisenhower and Johnson administrations, set in Blackland Prairie clay that never stops moving. Most of the calls we take here start with a keypad that’s gone dark or a remote that stopped working right after a hard rain, and the cause is almost always in the wiring or the post, not the circuit board itself. If your gate won’t open or won’t stay closed, call (940) 353-4158 and we’ll have a technician out with a written price before anything gets touched.

Call (940) 353-4158

Why Richland Hills Homes Are Different

Richland Hills is one of Tarrant County’s smallest fully built-out cities. Almost the entire housing stock went up in the 1950s through 1970s boom years, and nobody’s tearing those houses down to build new ones. That means the gate at your driveway is probably original or was installed decades ago, and the post holding it was set before anyone in North Texas thought about expansive clay soil. Add the BNSF rail corridor running through the city and you get something real: hinge bolts, drop rods, and latch hardware near the tracks loosen faster than anywhere else in the Mid-Cities. Ground vibration from freight traffic works on metal hardware the way weather works on wood, and homes within a few blocks of the line feel it constantly. None of this is hypothetical. We see it in the field every week, and it changes what a repair should cost and how long it should last.

Our Main Richland Hills Services

Two jobs dominate our schedule in Richland Hills: repairing gates that have shifted on old posts, and replacing motors and openers that North Texas ice and vibration have worn out. Below are the three service pages specific to this city.

Gate Repair in Richland Hills

Most repair calls in Richland Hills come down to three things: a gate that drags because the post has heaved, hinges that have rusted through, or a latch that no longer aligns after a few seasons of clay-soil movement. We repair what’s there before we quote a replacement. Gate Repair in Richland Hills

Gate Installation in Richland Hills

Installing a new gate in Richland Hills almost always means a new concrete footer, because mid-century posts were set shallow and the clay has shifted since Johnson was in office. We set posts below the frost and movement line, then build the gate to clear it. Gate Installation in Richland Hills

Gate Motor & Opener in Richland Hills

Motors here fail from vibration near the rail corridor, from freeze cycles on equipment never built for North Texas ice, and from circuits that short when the post leans and pulls the arm bracket out of square. We service nine automation brands and replace only what’s failed. Gate Motor & Opener in Richland Hills

Before

After

Gate Access Control in Richland Hills

Gate access control in Richland Hills means working on the keypads, card readers, remotes, and phone-entry systems that run gates on homes built before any of that technology existed. The constant theme here is retrofitted wiring: older posts are never plumb anymore, the clay heaved them a degree or two, and that slight movement pulls connections, shorts circuits, and causes keypads to fail in ways that look like a board problem but aren’t. We trace the actual failure, fix it, and photograph the settings before we leave. Gate Access Control is a service we document like a commercial job, because a gate that half-opens at 2 a.m. is a security issue, not an inconvenience.

Keypad Entry

Signs you need it

The keypad works intermittently, needs multiple presses, or goes completely dark after rain.

What it costs in Richland Hills

Keypad replacement or repair in Richland Hills runs $180-$420 depending on the brand and whether the wiring in the post has to be re-pulled.

How we do it

We test voltage at the keypad, check the wiring run for corrosion or breaks, replace the unit or the run, and program the codes in front of you, then photograph the settings.

Remote Control

Signs you need it

The remote opens the gate only from a few feet away, stops working after a storm, or only one of several remotes works.

What it costs in Richland Hills

Remote programming or replacement in Richland Hills runs $90-$260 including the remote and the programming visit.

How we do it

We check the receiver, confirm the frequency, replace or reprogram the remote, and test every remote on the property before we leave.

Phone Entry

Signs you need it

Callers hear rings but the gate won’t open, or the system opens for the wrong number.

What it costs in Richland Hills

Phone-entry diagnostics and replacement in Richland Hills run $220-$520 depending on whether the board or the relay is the failure.

How we do it

We test the phone line, the relay, and the power supply, replace the failed component, and test with two phone numbers before we call the job done.

What Gate Access Control Costs in Richland Hills

Why does my gate keypad fail after rain in Richland Hills?

Rain seeps into the post through rusted caps and degraded conduit, and the Blackland Prairie clay holds that moisture against the wiring for weeks. The keypad shorts, not because the board failed, but because the wire feeding it has corroded.

Can you add a keypad to a 1960s gate in Richland Hills?

Yes, if the post is solid or we replace it first. We pull new low-voltage wire in conduit, set the keypad at 54 inches, and photograph the control board settings. Call (940) 353-4158 for an exact quote.

Gate Parts & Welding in Richland Hills

Gate parts and welding in Richland Hills is rarely about welding a cracked weld. It’s about the original hardware: corroded wrought-iron hinges from mid-century fences, rotted wood posts that were never meant to hold this long, and rails that have sagged under their own weight after 60 years of North Texas weather. Because no new development replaces these old lots, the fix is on the existing structure. We order the part, machine or weld what needs it, and leave a photo record. Gate Parts & Welding covers hinges, posts, rails, rollers, and custom fabrication.

Hinge Replacement

Signs you need it

The gate scrapes the driveway, sags toward the latch, or the hinge pin has worn into an oval.

What it costs in Richland Hills

Hinge replacement in Richland Hills runs $140-$380 per hinge, including cutting off the old one and welding or bolting the new one in place.

How we do it

We cut the failed hinge free, clean the post, weld or bolt a heavier hinge in position, and photograph the finished weld before we release the gate.

Post Replacement

Signs you need it

The post leans visibly, the gate no longer meets the latch, or the post wobbles when you push it.

What it costs in Richland Hills

Post replacement in Richland Hills runs $380-$800 per post, including the new post, concrete, and resetting the gate.

How we do it

We dig out the old footer, set a new post below the movement line in fresh concrete, and re-hang the gate to plumb after the concrete cures.

What Gate Parts & Welding Costs in Richland Hills

Can you weld a broken wrought-iron gate in Richland Hills?

Yes, if the metal around the break is still sound. We grind back to clean steel, weld with the correct rod for the alloy, and prime the joint. Rusted-through sections need replacement, not weld buildup. Call (940) 353-4158 for an honest assessment.

Do you replace rotted wood gate posts in Richland Hills?

We do, and we set the new post in concrete with the gate re-hung level. Most Richland Hills posts fail at ground level from moisture held in the clay. The written quote covers the post, the concrete, and the re-hang.

Brands We Service in Richland Hills

We service LiftMaster, FAAC, BFT, and Mighty Mule motors on gates throughout Richland Hills. Parts for those brands are stocked in our metro warehouse and usually arrive the same day or next morning. See our brands for the full list.

Pricing for Gate Repair in Richland Hills, TX

Neighborhoods We Serve in Richland Hills

We serve every street in Richland Hills, from the neighborhoods closest to the TRE station and the rail corridor out to the western edge near the cemetery district. Response time is typically same-day or next morning for most repairs.

• The Avenues near the TRE Station
• Bellaire Drive corridor
• Baker Boulevard area
• Glenview Drive neighborhoods
• Richland Park area

Service Area - Cities Near Richland Hills

When a job takes us just outside the Richland Hills line, we also serve homeowners in Weatherford, TX, Azle, TX, White Settlement, TX, and Benbrook, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office.

FAQs About Gate Repair in Richland Hills